Snare/Tom Bracket
- Innendurchmesser: ca. 19.5 mm
- Höhe: ca. 30 mm
- Material: Gummi
Angebot enthält eine (1) Halterung ohne abgebildete Spannschrauben und Beilagscheiben
Gebrauchsanleitung:
1. Gewünschte Spannschraube aus dem Spannreifen von Snare oder TomTom drehen
2. Spannschraube von innen nach aussen durch das Loch im Boden der Halterung stecken. Wichtig: Die Beilagscheibe der Spannschraube muß sich außen an der Unterseite des Haltekörpers befinden, damit der Halterungsboden nicht beschädigt wird.
3. Die Schraube mit Halterung zurück ins Gewinde drehen und das Schlagfell wieder auf die gewünschte Tonhöhe stimmen.
4. Das DRUMPRAX Pad bis zum Anschlag in die Halterung stecken.
5. Wenn gewünscht Snareteppich aktivieren für authentischen superleisen Snaresound
ENGLISH
- Inner diameter: approx. 19.5 mm
- Height: approx. 30 mm
- Material: rubber
Offer includes one (1) bracket without clamping screws and washers shown
Instructions for use:
1. Unscrew the desired tensioning screw from the snare or TomTom hoop
2. Insert the tensioning screw from the inside to the outside through the hole in the base of the bracket. Important: The washer of the tensioning screw must be on the outside of the underside of the holding body so that the base of the holding device is not damaged.
3. Turn the screw with the holder back into the thread and tune the batter head back to the desired pitch.
4. Insert the DRUMPRAX pad into the holder as far as it will go.
5. If desired, activate the snare carpet for an authentic, super-quiet snare sound
Snare/Tom Bracket
inkl. MwSt., zzgl. Versand
Kostenloser Versand für Bestellungen aus dem Inland ab 49 €
Lieferzeit 2 - 4 Werktage